Cyclone separator introduction INOCO 900 Series Cyclone separator is a combination of multi-branch cyclone tube and cartridges for separating particles and droplets from gas. Principle of operation First stage filtering Cyclone tube gas-liquid separator: When the gas flows containing liquid into...
INOCO 900 Series Cyclone separator is a combination of multi-branch cyclone tube and cartridges for separating particles and droplets from gas.
First stage filtering
Cyclone tube gas-liquid separator: When the gas flows containing liquid into the gas-liquid separator, due to the rotation of the cyclone vortex tube design, the flow will produce a strong vor tex motion, creating a strong centrifugal force, making the solid particles and liquid impurities attached to the cyclone tube wall.
After the impurities are separated from the gas stream, then fluid accumulates in the region of the container. Gas af ter purification leaves cyclone tube separator with minimal pressure drop into the next level of filtering.
Cartridge filtration and separation: This level is made of numbers of filter elements which can be replaced or repeatedly cleaned.
Such type of filter element and the accuracy level are selected according to work conditions, the purpose is to remove the smallest solid particles and condense mist and make maximum droplets could be removed from the separator.
INOCO learns the advantages of domestic and foreign cyclone tube technology and developed the separation for gas-liquid-solid-phase with high efficiency performance and wear resistant and corrosion resistance, It has high surface hardness (surface hardness up to HV900 ~ 1000),great corrosion resistance (applicable to acids, alkalis, wet hydrogen sulfide environment and etc).
Cyclone tube is a 2-inch using centrifugal principle of tubular pipe. Gas to be filtered enters the inlet port and forms rotational flow in tube, as for the liquid and solid particles and gas density differences, with the centrifugal force separated, clean fuel gas from the conduit to flow away the solid and liquid particles fall into the bottom of the separator from the conduit then drain away from the outfall. The number of Cyclone tube is based on the actual gas flow and pressure drop allowed.
Separation: For dust particles and droplets of 8-10μm, the removal rate is 100%
Cyclone pressure drop: less than 0.04MPa
1. Overall structure fits two-phase flow characteristics, wear light, less workload to examine and repair
2. Reasonable structure, clogging problem does not occur
3. For more harsh temperament medium, cyclone tube can use original high wear and corrosion nickel-phosphorus plating manufacturing technology, the surface hardness reaches up to HV900-1000, with high wear resistance and long service life
4. Wide operating flexibility, to ensure the separation efficiency and the range of allowable pressure drop ,single-tube flow ranges 135-185m3/h;
1.Strict contract auditing invloved all departments to assure the feasibility of each order.
2.Process design and validation before bulk production.
Strictly control on all raw and auxiliary materials, All raw materials reach the world advanced level.
3.On-site inspection to all processes, inspection record keep traceable for 3 years.
4.All inspectors are skilled with international certificates.
5.Qualified WPS and professional welders guarantee welding quality.
6.100% inspection of finished sprouts before shipment.
7.Advanced and complete testing and inspection equipment: NDT, metal Microscope, impact tester, hardness tester...
8.Regular training for inspection staff.
1. Which level of quality are your products?
A:We have got CE, ISO, SGS, TUV, Rosh, ASME certificate so far.
2. As the shipping period will take long time, how can you make sure the machine won’t be broken?
A:Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.
3. About the after-sale service, how can you solve the problems occurred of your overseas customer in time?
A:The warranty of our machine is normally 12 months, during this period, we will arrange the international express immediately, to make sure the replace parts to be delivered as soon as possible.
Quality guarantee: 12 months after the equipment having been operation, but no more than 18 months after the equipment have been delivered (guarantee not include consume parts).
4.why choose us?
A: We are one of High-tech Enterprises, AAA Contract and Trustworthy Enterprises, AAA Technology Consulting Firm. We are the manufacturer obtained the certificate of ISO9001.
5.What payment terms do you accept?
A:T/T or L/C or West Union or Moneygram or Paypal, others is welcome.
6.What is the delivery time of filter ?
A:In general, 35 days after advanced payment, if OEM, it will be 40-45 days after advanced payment, port of delivery is Shanghai.