Automatic Self Cleaning Filter

Automatic Self Cleaning Filter
Product Details

1.Automatic self cleaning filter Introduction

Automatic self cleaning filter is applied for high flow mechanically cleaned and complex impurities, which an can match 10”,12”,14” and 68” pipe line. If your process flow capacity is more than 2500m3/h, it is advised to use this liquid filtration system with multiple sets filtration.


2.Self cleaning filter process

When the differential pressure of inlet and outlet pipeline reaches the presented value, the filter will start the cleaning process. The whole self-cleaning process contains two steps: the drain valve opens; the two stainless steel brushes which is driven by motor inside will brush off impurities which was captured by the mesh and then impurity will be discharged from drain valve.. The whole cleaning process takes about 15 to 60 seconds, while during this time, the filtration system does not stop flowing and controlled by a control box.

Control type: it has three model of this, time, differential pressure and PLC control.