INOCO XF-F series automatic back washing sucking filter provides fully automatic back washing clean operations in industry application, and it can continuously separate impurities from water and other liquid. The maintenance and operation of filter application is very simple, even in the severe operation conditions it also can continue to keep running in a good operation.This filter is a kind of filter application which can provide a wide range of comprehensive use of industry, it can guarantee the purity and reliability of filtrated liquid.
|INOCO filter code|
GB150 & HG/T21637
Flow rate Range
motor or pneumatic
EPDM;BUNA-N; Fluorous Rubber
Inlet and Outlet OD
100μm/ flow capacity
The water which needs to be filtered flows into the shell through the lower bottom of the filter and enters the lumen of the filter elements through the rotary table from bottom to top and be drained out through the filter elements. The filtered clean water flows out from the upper outlet of the filter. Solid impurities are trapped in the inner side of filter elements. While in the process of backwashing, no need of cutting off the water. Motor drives filter wheel rotating and the drain valve was opened at the same time. Each filter elements will be backwashed by the filtered clean water in turns.
The pressure design of filter body is usually based on the chemical pipeline filter and steel pressure vessel design standards. The filter also can adapt to the special requirements of other design criteria. Filter main body has the material such as carbon steel, stainless steel, and duplex phase and etc. at the same time, we also can provide special materials such as titanium, pure nickel and etc.
The pressure difference between the water pressure in the filter and the atmospheric pressure can make filtration liquid flows reversely so that the intercept impurity on inner face of the filter element can be removed. After the wheel rotates a round, backwashing process is over. When backwashing valve closed and drive motor stops.
Automatic backwash sucking filter has been widely use in pool filter, marine filter, 150 micron filter now, it has good performance for filtering 100-200 micron solid. Other filter applications are as below.
□Water and waste water □Non-ferrous metal
□Pulp and paper □Plastic extrusion processing
□Chemicals □Machine coolant filtration
□Petrochemical □Construction industry
□Iron and steel
￭Sucking filter can be equipped with different amount of elements to provide maximum filtering area in each filter housing application in order to have smallest pressure loss while working.
￭Super high flowrate
￭Rigid filter element and variety options
￭Fully automatic self cleaning, it is automatic filter
￭Simple, reliable and economic
1.What equipment do you have for NDT inspection?
A:We have ultrasonic flaw detector, av miniature magnetic yoke detector, magnetic detector and penetration detector.
2. Where is your factory located?
A:Our factory address is : No.58 Rongxing 3rd Road, Furong industrial park, Wuxi city, Jiangsu province, China
3. Which level of quality are your products?
A:We have got CE, ISO, SGS, TUV, Rosh, ASME certificate so far.
4. As the shipping period will take long time, how can you make sure the machine won’t be broken?
A:Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.