INOCO-D duplex bag filter is the filter system which use two sets bag filters to achieve the effects, one work, one standby, or two filter are work in both. It is easy for install and clean and larger filter area will have more dirty amount, the more working time and the less clean times.
Reasonable structure, cover small an area of an area small, good sealing, large flow capacity easy operation, the inside and outside of filter treatment is sand blasting or polishing processing, so the surface is smooth and good surface performance.
Material: CS, SS304,SS316L, CS lined PO, CS lined PTFE
Filter accuracy: 2-100mesh
Working temperature: 0-500℃
Working pressure:0-20 Mpa
Design code: H21637-1991, ASME VIII
Choose in option
Adjustable filter leg
High temperature and high pressure design
Filtration of pretreatment bath, filtration of E-Coat, topcoat and clearcoat, primer, paint ring line filters, parts cleaning fluids, drawing compounds, lubricants, metal working fluids and pump intake filters.
Catalyst recovery, removal of pipe scale, polishing of aqueous process fluids, alkalis, acids and solvents, filtration of emulsions and dispersions, gel removal from resins. Activated carbon or catalyst removal in the fine chemicals industry is a typical example of a demanding application in chemical processing. INOCO Filter Bags meet these application requirements for high filtration efficiency coupled with long service life and reliability.
Wafer and chip processing, electronic etching baths, photo- chemical polishing and highpurity water filtration and prefiltration of various membrane filtration processes to improve their cost effectiveness. INOCO Filter Bags demonstrate the required purity, efficiency and consistent performance.
Food and Beverage
Polishing filtration of wine, spirits and beer, removal of particles from edible oils, removal of carbon black from cellulose, slime removal in gelatins, liquid sugar, thick juice, corn syrup polishing, starch processing, milk processing and soft drinks. Many INOCO Filter Bags conform to FDA and even EEC food processing standards and can meet the unique and varied demands of these applications.
Filtration of hydraulic oil, pretreatment system filtration, precious metal recovery, metal working fluids, and drawing compounds. Parts cleaning machines use our filter bags for minimizing residual dirt on parts.
Filtration of lube oils, fuel additives, enhanced oil recovery, filtration of amine solutions, filtration of glycol fluids, gas purification processes, distillation and cracking processes, amine washers, off-shore filter stations, oil drilling and injection fluids.
Paint and Lacquer
Removal of agglomerates, removal of paint coagulates, solvent filtration, removal of storage contaminants, filling lines, and paint mixing lines, monomer purification.
Recovery of expensive active ingredients, catalyst re covery, active carbon purification and removal, filtration of gelatins, hormones, vitamin extracts, polishing of herbal mixtures, protein removal from plasma, filtration of saline solutions.
Resins, Plastics, Inks and Coatings
Oil and polymer filtration, dispersions, polymerization batches, resins for can coatings, plastics compounding, printing ink, plastics processing, paper coatings, high purity ink-jet fluid filtration.
Well water filtration, water treatment plants, silt removal, pipe scale removal, sand and algae removal from sea water, ion exchange resin recovery, calcium deposit removal, filtration of chemicals used for water treatment, dust removal from cooling tower installations. Surface water filtration is an area traditionally dominated by cartridge filtration. Now, the high efficiency and long life of INOCO High Performance Filter Bags are a cost-effective alternative to expensive cartridges.
Ø Provide the technical design and solutions;
Ø New plant construction guidance;
Ø Designing and manufacturing of non-standard equipment;
Ø Professional technical training and guidance on site according to the contract;
Ø Supply accessories at any time;
Ø Tele-technical consulting and services;
Ø Other special technical service according to client’s requirements.
￭Sucking filter can be equipped with different amount of elements to provide maximum filtering area in each filter housing application in order to have smallest pressure loss while working.
￭Super high flowrate.
￭Rigid filter element and variety options.
￭Fully automatic self cleaning, it is automatic filter.
￭Simple, reliable and economic.
1. Where is your factory located?
A:Our factory address is : No.58 Rongxing 3rd Road, Furong industrial park, Wuxi city, Jiangsu province, China.
2. Which level of quality are your products?
A:We have got CE, ISO, SGS, TUV, Rosh, ASME certificate so far.
3. Can the machine be customized as our need, such as put on our logo?
A:Surely our machine can be customized as your need, Put on your logo is also available.
4. May i know which payment will be accepted by your company?
A:So far 100%T/T before shipment, and 30% deposit paid by T/T, balanced paid by L/C are available.