Automatic brush self cleaning filter is widely used in all industry area, which is suitable for filters with 1’’-36’’ pipeline to choose from, with advantages of continuously fluid flow, safety operation simple maintenance. Brush filter can continuous water supply, only less than 5% of the total flow for water for cleaning,2-15 seconds flushing time. Self cleaning brush filter is with high filtration precision, >200μm filtration degree, all kinds of filter mesh which can be chosen. filtration area of brush type self-cleaning filter is 7~40 times of inlet area. This brush filter is equal with Bernoulli filter, Long service life, normally the working time can be more than 10 years and Environmentally friendly –no chemical treatment required. Besides, you have many choices when required, for material, you can choice carbon steel filter housing and stainless steel water filter housing and SS316L. for reliable cleaning type, it has manual, time and differential pressure by control box’s PLC control.
Original: Jiangsu, China
Certification: ISO9001,CE, ISO14001, Rosh, ASME “U” stamp
Material: Carbon steel, SUS304, SUS316L
Voltage: 220V/380V 50Hz, the voltage can be as local demand
Payment term: T/T, L/C or others
Delivery date: 35 days after advanced payment
Packing: export wooden case
Market: Middle East/ Africa/Asia/South America/Europe/North America
Warranty: 1 year
MOQ: 1 set
When the differential pressure of inlet and outlet pipeline reaches the presented value, the filter will start the cleaning process. The whole self-cleaning process contains two steps: the drain valve opens; the two stainless steel brushes which is driven by motor inside will brush off impurities which was captured by the mesh and then impurity will be discharged from drain valve.. The whole cleaning process takes about 15 to 60 seconds, while during this time, the filtration system does not stop flowing and controlled by a control box.
Control type: it has three model of this, time, differential pressure and PLC control. XF-X01 automatic brush self cleaning filters are widely used in water filtration or the condition of filtering suspended solids with high performance filtering, economic and environmental effects.
Flow rate Range
Inlet and outlet size
Design Pressure Class
General type :0.6MPa/1.0MPa/1.6MPa;high pressure type: 2.0MPa/5.0Mpa
General type:0-95°C;high temperature:250°C;
4970 cm2 - 89530 cm2
HG20592-2009(China Standard), ANSI B16.5 Class 150 /300/600 , JIS
River water, lake water ,recycle water, process water, reinjection water, sea water, potable water and etc.
Filter Element Data
V-SLOT series slotted screen, Stainless steel 304,316L/Super Duplex/Ti2
4970 cm2 - 89530 cm2
Control and Electricity
3 phase, 380V or 220V (24 V AC/DC)
Expoxy coated carbon steel , SS304,SS316L
Epoxy, PA11 for CS Housing or special anti-corrosion requirement
Pipe diameter (mm)
Filter flow rate (m3h)
Filtration area (m2)
Drain valve DN (mm)
Clean water consumption per once(L)
Motor power (KW)
INOCO offers a varity of construction materials, please consult us for specification.
This brush filter is widely used in cooling water filtration, protect shower nozzle, waste water’s three level treatment, Municipal water reuse, warehouse water treatment, Pre-filtration before RO system,acid pickling, white water filtration of paper, Injection molding machine; Pasteurization system; Vacuum pump system; Air compressor system; Continuous casting system; Water treatment application; The cooling system of heating and heating.
a. High quality raw material: we mainly choose raw material from big steel factory, such as TPCO, BAO STEEL, SHA STEEL, which are best and largest raw material manufacturer in China.
b. Strict Physical/Chemical testing procedures: meeting the requirements of the product design and process, providing reliable testing data.
c. Short Delivery time: If more than 10 sets, 50 days. We also stock some standard-sized brush self-cleaning filter, if you need 3-5 pcs, we can delivery soon.
INOCO series of filters have high recognition and praised by Conoco Phillips, Shell, Fluor, Sinopec, PetroChina, Samsung engineering, BASF, Bayer, Worlypesons etc. clients.
1. Are you a manufacturer, trading company or a third party?
A:We are a manufacturer, and we have builded up our company since 2007.
2. Where is your factory located?
A:Our factory address is : No.58 Rongxing 3rd Road, Furong industrial park, Wuxi city, Jiangsu province, China.
3. Which level of quality are your products?
A:We have got CE, ISO, SGS, TUV, Rosh, ASME certificate so far.
4. As the shipping period will take long time, how can you make sure the machine won’t be broken?
A:Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.