In the face of increasingly serious pollution of the air environment, the implementation of energy conservation and environmental protection measures is the most important aspect of our current development. Reducing energy waste is the prerequisite for ensuring the steady development of society. So how do you do it? Naturally, different filtering devices are used. In terms of air filters, they can be classified into high-efficiency, medium-efficiency filters, etc., but we all know that air filters are devices that consume a lot of power. The following four filters for the air filter to explain the three directions of energy reduction:
1. Low section wind speed design
Air handlers, air filters, and fan energy can all use smaller fans and motors, because small fans add less heat to the air, reducing the difficulty of cooling; while smaller coils are easier to clean and more efficient. High, the temperature of chilled water can be higher. The filter works better and lasts longer under such conditions.
2, motor efficiency
The motor consumes most of the power of the clean room, and the continuously running motor consumes a large amount of electricity every month, which is also very unfavorable for environmental protection. The ten techniques for energy saving in clean room air filters can improve efficiency and properly adjust the size. After renovation, most of the economic effects are good.
3, the number of air changes
The clean room needs to maintain a certain amount of air flow to maintain cleanliness and number of particles. The flow rate is determined by the number of air changes per hour, which also determines the size of the fan, building configuration and energy consumption. The reduction in air flow rate reduces construction and energy costs while maintaining cleanliness.
After mastering the above basic methods, our air filters will be able to get better results and a longer service life, and not only for this, but also for other filtration equipment such as activated carbon filters, chemistry. Filters, etc. also have something in common, and it is best to consult a professional at the time of purchase.