Filters are our indispensable purification equipment and the best assistant to protect the environment. Self-cleaning filters are also widely used in industrial production. But no matter what kind of equipment, if you want to make the equipment last longer, we need to take effective measures for maintenance, such as: regular maintenance, regular cleaning, regular inspections, etc.
The important part of the filter is the filter chip, which is usually made of stainless steel. The filter chip of this material often has the accumulation of impurities after a period of use, which will affect the working efficiency of the device over time. At this time, we must do a good cleaning in time. We only need to clean the impurities on the chip, and we must check the chip regularly for damage. If the filter is found to be damaged, we must replace it in time to avoid unnecessary problems.
In addition, it is also necessary to pay attention to the pressure of the device. When the eye of the device is reduced, the flow rate will gradually slow down, and the filtering effect will be reduced. When encountering such a situation, the filter is deliberately reminding us to pay attention to cleaning and maintenance.
When cleaning the filter, first put the replaced filter outside and ash the ash, then use the washing tub to add water to infuse the foam and gently wash it. The cleaned filter should also be air dried at the vent until the filter is cleaned. Finally, check the damage and air leakage before installing the filter. The installation can be carried out without any problems.www.inocofiltration.com