Home > Knowledge > Content

Pipe filters for the application of materials and automatic control methods

Feb 06, 2018

When it comes to the characteristics of the pipeline filter, what we can think of is its compact structure, large filtration capacity, small pressure loss, wide range of application, easy maintenance and so on. In the process of using the pipe filter, but also how to do manual and automatic control?


The same applies to corrosive materials used in chemical production, including caustic soda, soda ash, concentrated sulfuric acid , Carbonic acid, aldonic acid and the like.


In addition, the pipeline filter can also cool the low-temperature materials such as liquid methane, liquid ammonia, liquid oxygen and various refrigerant filter. Even food, pharmaceutical production have health requirements of materials, such as beer, beverages, dairy products, syrup, etc. can also be processed through the pipeline filter.


Introduce the manual method of pipe filter control, turn the manual / automatic selector switch to manual position, power on the motor and hydraulic control valve, open the hydraulic control valve, and start draining. At this time, the selector switch is rotated to the automatic position and enters the automatic state.


The manual control status of the pipeline filter is a means to check whether the motor and the hydraulic control valve can work normally. If the manual control status is not normal, the automatic sewage control status will not work properly, so the operation in this respect is not necessary.


Followed by the automatic control of the pipe filter, the manual / automatic selector switch to the automatic position, first set the filter time and blowdown timers. The digital display of the lower row of the timer shows the setting value, the digital display of the upper row shows the timer value. If the machine is powered off, the next time the power is turned on, the timer starts automatically and timed according to the set time.