Home > Knowledge > Content

Water treatment process and function of self-cleaning filter

So far, self-cleaning filter water treatment equipment has been recognized by everyone, and has also received widespread attention, mainly because the self-cleaning filter can play an active and effective role in the water treatment process to ensure that the water quality to achieve a corresponding The standard.

 

The self-cleaning filter itself is a kind of filter that directly intercepts the impurities in the water, removes water suspended solids, particulate matter, reduces turbidity, purifies water quality, reduces system dirt, bacteria and algae, corrosion, etc., to purify water quality and protect other equipment of the system. Normal working precision equipment. The water enters the self-cleaning filter body through the water inlet, and due to the intelligent design, the system can automatically identify the degree of impurity deposition and automatically discharge the sewage valve signal.

 

The entire operation of the self-cleaning filter is such that the water to be treated enters the body from the water inlet, and impurities in the water deposit on the stainless steel filter, thereby generating a pressure difference. The pressure difference of the inlet and outlet is monitored through the pressure difference switch. When the pressure difference reaches the set value, the electronic controller gives the hydraulic control valve and drives the motor signal, causing the following actions.

 

The motor in the self-cleaning filter will drive the brush to rotate, and the filter element will be cleaned. At the same time, the control valve will open to discharge the dirt. The entire cleaning process lasts only several tens of seconds. When the cleaning is completed, the control valve is closed and the motor stops rotating, and the system returns to its initial state and starts to enter the next filtration process.

 

In order to have a better use effect, after the self-cleaning filter is installed, it needs to be debugged by a technician to set the filtration time and cleaning conversion time. The water to be treated enters the body from the water inlet, and the filter starts to work normally, when the preset is reached During the cleaning time, the electronic controller gives the hydraulic control valve and drive motor signals, causing the following actions.

 

Similarly, the brush is rotated by the motor to rotate the filter element, and the control valve is opened to discharge the dirt. The entire cleaning process lasts for several tens of seconds. When the cleaning is completed, the control valve is closed, the motor stops rotating, and the system returns to its initial state. This is done in a loop.

 

From this point of view, self-cleaning filters do play a vital role in water treatment. They not only play a role in purifying water sources, but also have a high degree of automation in self-cleaning filters, which saves manpower and promotes its economic development. The significance.http://www.inocofiltration.com/