Home > Knowledge > Content

What are the installation steps for the backflush filter?

Jan 05, 2019

Backflush filter's leading product structure and function design, compact structure, original filter shell integral molding, processing technology, avoiding various dripping caused by steel filter shell welding; high-strength ductile iron material has excellent corrosion resistance and prolongs product The service life of the filter element; the high-precision filter element will never wear, the pressure test will never be deformed, and the factory precision test will meet the user's requirements.


In addition, the coarse and fine filter screens in the backflush filter are made of stainless steel welded mesh, and the sieve plate and the screen mesh are composed of inner and outer double-layer structure; because the filter core adopts active cleaning method, the anti-interference ability is enhanced, and the cleaning is thorough, especially Suitable for poor water quality conditions.


The installation of the backflush filter only needs to be connected to the pipeline according to the direction of the water indicated by the arrow on the equipment cylinder; the installation should consider the sewage outlet at the lower part to facilitate the smooth discharge of debris; the sewage pipe is connected to the drainage ditch, and should be Keep drains smooth.


In order to facilitate observation of system operating conditions and daily operation, pressure gauges and manual valves should be installed at the inlet and outlet; when draining the filter, the filter should be flushed for 10 to 60 seconds according to the discharge condition. In addition, you should also know how to use the microcomputer controller for the backflush filter.www.inocofiltration.com